How to create and install Windows 8 using bootable USB Stick

Gone are the days, when we used to burn CD and DVDs to install operating systems. Now all modern operating systems lets you install using PEN Drive/USB Storage Device/USB Stick. And this article describes step by step guide to format and create bootable Windows Vista/Windows 7/Windows 8 USB Stick.
Requires:

• Windows Vista/Windows 7/Windows 8 ISO or DVD 0r installation source (setup backup files)
• A 4GB USB 2.0 Storage device (Its recommended to use USB 2.0 device for optimal performance)

How To:

1. Plug your USB storage device. and run CMD and execute the following commands one by one.

Diskpart
Run Disk partition utility
List disk
To get disk index that is used to perform disk partitioning.
Select disk 1
Selects disk to perform disk partitioning.
Clean
Flush your existing all USB drive’s partitions.
Create partition primary
Creates a partition as primary partition.
Format recommended
Format your USB drive with recommended parameters. (No need to worry about file system format)
If you have customized WIM image and its bigger than 4Gb than you’ll have to format your USB flash drive in NTFS file system, therefore the command would be: Format FS=NTFS
Active
Set the partition as active to hold bootmgr.
Exit
To quit Diskpart utility

1. Now copy all Windows Vista/7 files to USB storage device…that’s all.
2. Re-boot your PC with it, you will be able to install Windows Vista/Windows 7/Windows 8 using USB Stick.

Note: If you face any trouble to boot with it or unable to boot, try this FIX.

I:BootBootsect.exe /NT60 I:

Where I: is the drive letter of USB Stick
Applies To:

• Windows Server 2008 R2
• Windows Server 2008
• Windows 7
• Windows Vista
• Windows 8 Developer Preview
• Windows 8 Server